Home Uncategorized Where is the origin of saipai floor tiles? What is the outer packaging like

Where is the origin of saipai floor tiles? What is the outer packaging like

by admin

when selecting floor tiles, we should focus on the following aspects: first, it depends on the brand. Only the well-known brand of floor tiles, the quality of building materials can reach the national standard, and the content of harmful substances can be within the safe range. Second, it depends on its antifouling ability. If the family is very busy and can only clean once in two or three days, it is necessary to choose one with better antifouling ability. Third, if there are old people and children at home, we must make an anti-skid test when buying
specifically, the selection of floor tiles can start from the following aspects:
1 To check whether the green body color of ceramic tile is pure. Mainly observe whether the color of the back of the ceramic tile is uniform and consistent
2. Observe whether the particles on the cross section of the ceramic tile are fine. The cross section mentioned here does not refer to the cutting surface around the ceramic tile, but refers to the fracture of the ceramic tile fragment. Generally speaking, the fine, hard and brittle fracture with consistent color is the top grade. Because the ceramic tile with fine particles has strong waterproof ability, while the ceramic tile with large particles is easy to immerse water and affect the quality
3. Pay attention to the thickness of glaze layer. Glaze thickness is the thickness of the cross section of the glaze. Glaze is the most expensive material in the cost of ceramic tiles. The thicker the glaze layer, the better the quality
4. Listen. Tap the ceramic tile and pay attention to whether the sound is crisp. If the sound is clear and pleasant, it is the top grade, and if the sound is dull, it is the second grade
5. Try the water. Consumers can pour some water on the back of the ceramic tile and pay attention to the speed of water absorption of the ceramic tile. After a few minutes, see if the marks left by the water on the front are obvious. The ceramic tile with slow infiltration after water dispersion has a high density, and the water impression is not obvious, which is regarded as top grade
6. Warping. Take two bricks back-to-back and face-to-face to see if they can be in close contact. If there is too large gap, you can judge whether there is warpage
7. Infiltration. Apply ink on the surface and scrub it after 1 hour to see if there are traces. Good bricks have no traces, and those with infiltration are resolutely not selected.

Related Posts

Leave a Comment